TradingView Multi-Chart Layouts: Watch Gold and Bitcoin at a Glance

Flipping between tabs to check gold, then bitcoin, then a higher timeframe, then back again is how you miss the thing you were watching for. By the time you have clicked around, the candle you cared about has closed. Multi-chart layouts fix that. Instead of one chart at a time, you put several on screen at once and read them together.

This guide covers how to build, sync, and save TradingView multi-chart layouts so you can keep an eye on gold and bitcoin across timeframes without the tab-shuffling. The mechanics are simple once you know where the buttons live, and the payoff is a workspace you open once and trust.

What a multi-chart layout actually is

A layout is your whole charting workspace saved as one thing. In a single-chart layout you see one symbol on one interval. A multi-chart layout splits the screen into a grid, and each cell is a full, independent chart with its own symbol, timeframe, indicators, and drawings.

The key word is independent. Each pane behaves like its own chart until you decide to link them. That is what makes the setup flexible. You can run four different symbols on the same timeframe, or one symbol on four different timeframes, or any mix you want.

A few common setups traders reach for:

• One symbol, many timeframes. Bitcoin on the daily, 4-hour, 1-hour, and 15-minute at once. You read the trend on the high timeframe and time your entry on the low one without switching charts.
• Many symbols, one timeframe. Gold, bitcoin, the dollar index, and maybe a stock index, all on the daily. Good for spotting when several markets move together.
• A watch grid. A handful of symbols you track daily, each on its preferred interval, so a morning check takes thirty seconds.

Multi-timeframe reading is the workhorse here. If you want the theory behind why traders stack intervals, multi-timeframe analysis explained goes deeper than we will here.

What your plan unlocks

This is the part that trips people up, so let us be plain about it. The free plan gives you one chart per tab. No grid. That is not a dead end, and plenty of people trade fine on a single chart, but the multi-chart grid is a paid feature.

Paid tiers unlock more panes as you go up, from a two-chart split to layouts with several charts on screen at once, along with more saved layouts to switch between. If you are weighing whether the upgrade earns its keep, tradingview free vs paid plans breaks down what changes at each level. You can build all of this on TradingView directly and test the grid before committing to a higher tier.

One honest note before we build anything: more charts on screen is a convenience, not an edge. It saves clicks. It does not tell you what to do. The decision still comes from your plan and your read.

Building your first grid

Start from a normal single chart. Look at the top toolbar for the layout selector, usually shown as a small grid icon near the top right. Click it and you get a menu of grid options: two charts side by side, a 2x2 square, columns, rows, and larger arrangements on higher plans.

Pick a 2x2 to start. Your one chart becomes four, and the three new panes copy your current symbol and interval. Now you shape them:

1. Click a pane to select it. The active chart gets a subtle highlight border. Every toolbar action applies to whichever pane is active.
2. Change its symbol. With a pane selected, type a ticker. Type XAUUSD in one, BTCUSD in another.
3. Set its timeframe. Use the interval buttons at the top to give each pane its own timeframe.
4. Add indicators per pane. Indicators attach to the active chart only. If you need a refresher on that step, how to add an indicator to TradingView walks through it.

Work around the grid, pane by pane, until each one shows what you want. It feels fiddly the first time and takes about two minutes by the third.

A sensible starting layout

If you are not sure how to arrange things, this grid works well for someone tracking both metals and crypto:

Top row for context, bottom row for timing. Your eye learns to travel down a column when you want to act and across the top when you want the big picture.

Syncing charts so they move together

Here is where a grid goes from four separate charts to one instrument. Look at the top-right corner of any pane and you will find a row of small colored circles. These are the link toggles, and each one ties a specific property across every linked chart.

The ones worth knowing:

• Symbol sync. Type a new ticker in one chart and all linked charts jump to it. Perfect for the one-symbol-many-timeframes setup: switch from bitcoin to gold and your whole timeframe stack updates at once.
• Interval sync. Change the timeframe in one chart and the rest follow. Usually you leave this off in a multi-timeframe grid, since the whole point is different intervals.
• Crosshair sync. Hover over a candle in one chart and the crosshair lines up on the same moment in every other chart. This is the quiet hero. It lets you read what price was doing across timeframes at one exact point in time.
• Time sync. Scroll or zoom one chart and the others align to the same date range.
• Drawing sync. A trendline or level you draw appears on the other linked charts too, when they share the symbol.

Each toggle is its own color, and charts sharing a color are linked for that property. You can run two separate link groups in one layout: link the two gold panes with one color and the two bitcoin panes with another, and each pair stays in its own world.

The combination most people settle on is symbol and crosshair synced, interval left independent. You get one instrument you can swap in a keystroke, with a crosshair that reads all timeframes together, while each pane keeps its own interval.

Saving the layout so it comes back

A grid you rebuild every morning is a grid you will stop using. Save it. Find the layout name near the top right, click the save control, and give it a name that tells you what it is, like "Gold and BTC daily plus 1H".

A saved layout stores everything: the grid shape, each pane's symbol and timeframe, every indicator, your drawings, and the link settings. Log in on another machine and it loads exactly as you left it, because layouts live in your account rather than on the device.

Build a small set of named layouts for different jobs. A trend-review layout, a timing layout, a broad market-watch layout. Then switching context is a menu click instead of a rebuild. Give the panes a clean, consistent look and they become faster to read across the whole set. If you want a tidy visual baseline, best TradingView chart settings covers the style choices that make a busy grid legible.

Layouts versus templates

These two get confused, and knowing the difference saves real time.

A layout saves the entire workspace, the grid and all the charts in it. A template saves the indicator and style setup for a single chart, so you can apply the same package of studies to any symbol in one click. Use templates to keep a consistent indicator set, and use layouts to save the whole grid those charts live in. They stack: a good template makes each pane in your layout consistent without setting studies up by hand every time.

Keeping a multi-chart workspace usable

More charts means more room to clutter. A few habits keep it readable:

• Do not overload panes. Three or four indicators per chart is plenty. If you catch yourself stacking eight, how many indicators should you use is worth a read before your screen turns to soup.
• Match the axes. When comparing the same symbol across timeframes, keep the price scale consistent so levels line up by eye.
• Use the biggest pane for the decision timeframe. Some grids let you make one cell larger. Put your primary timeframe there.
• Learn a couple of shortcuts. Jumping intervals and symbols by keyboard is much faster than clicking around a grid. A handful of TradingView keyboard shortcuts pays off every session.

And resist the urge to add a pane just because you can. Four charts you read is better than eight you glance at. The grid is there to remove friction, not to make you feel busy.

The takeaway

A multi-chart layout is a small setup with an outsized payoff on how smoothly your session runs. Split the screen, give each pane a symbol and timeframe, link symbol and crosshair so the panes read as one instrument, and save the whole thing under a clear name. Build two or three layouts for different jobs and you stop rebuilding charts and start reading them. Spend ten minutes setting it up once, and every session after is a menu click instead of a scavenger hunt.

FAQ

How many charts can I put in one TradingView layout?

It depends on your plan. Free accounts get a single chart per tab. Paid tiers unlock multi-chart grids, from two charts up to eight on the higher plans. The number of layouts you can save also scales with the plan.

Can I sync all my charts to the same symbol?

Yes. Each chart has small colored link toggles in its corner for symbol, interval, crosshair, time, and drawings. Turn on symbol sync and typing a new ticker in one chart changes every linked chart at once.

Do saved layouts keep my indicators and drawings?

A saved layout stores the grid, each pane's symbol and timeframe, your indicators, and your drawings. Reopen it later and everything comes back exactly as you left it, on any device you log in from.

What is the difference between a layout and a template?

A layout saves the whole workspace, meaning the grid and every chart in it. A template saves the study and style setup for one chart so you can stamp the same indicators onto a different symbol. They solve different problems and work well together.